INDUSTRIAL CONVEYING & MATERIAL HANDLINGVICTORIA-WIDE CONVEYOR SERVICES
Statewide ConveyorsEnquire

Industries

Recycling

Mixed waste streams can combine sharp edges, variable loads and oily residues. Sorting belts and transfer components need to account for what is actually moving through each stage.

Receiving and feeding mixed material

Receiving conveyors and hopper feeders must accommodate variable loads, bulky items and occasional sharp objects. Assess the material stream, surges and loading method before selecting the belt cover and support. Oil resistance may be relevant for some streams; it is not a substitute for checking the actual contaminants.

Sorting, picking and process transfers

Picking belts need controlled presentation of the stream and space for the surrounding workstations. Transfers to screens, trommels and other separation equipment need compatible inlet heights and trajectories. A chute that narrows abruptly or feeds off-centre can cause blockage and repeated tracking problems.

Inclines and discharge

Profiles or cleats may help retain loose material on an incline, but their spacing and height must suit the item size and discharge. Consider how material releases into a bunker, hopper or next conveyor, and leave room to clean the return run and service rollers.

Connect the fault to the work

For spillage, assess loading support and skirting. For carryback, review cleaners and the joint passing beneath them. For edge damage, inspect tracking and trapped objects before repairing the belt. Worn pulleys, rollers and transfer surfaces can be included in a defined maintenance scope; proposed chute or access alterations require a separate design review.

Recycling: connect the process problem to a work package

Receiving and hopper feed

Surges, bulky objects and impact

Assess support, cover selection and entry geometry; define belt repair where needed.

Picking and sorting

Uneven presentation or wandering belt

Inspect feed distribution, tracking and the condition of support rollers.

Trommel and screen interfaces

Blocked or off-centre transfers

Review inlet heights, chute clearances and the need for a design assessment.

Incline and bunker discharge

Rollback, carryback or escaped fines

Assess cleats, cleaning and skirting against the actual recovered-material stream.

Prepare a shutdown around the affected sorting stage

State whether the line handles mixed municipal recyclables, construction waste, organics or another stream. Photograph the whole interface as well as the damaged part. This distinguishes local belt or component work from a wider transfer modification and helps identify neighbouring equipment that affects access.

Tell us about your operation

  • Recycling stream, largest items and likely contaminants
  • Receiving, picking, trommel or discharge stage needing attention
  • Photos of the full transfer and the damaged or blocked area
  • Belt size, feed rate, access and shutdown availability
Discuss this application

Conveying through the recovery process.

Receiving, sorting and discharge each place different demands on the belt. Describe your waste stream, transfer arrangement and operating problem so we can discuss the equipment and service requirements.

Discuss your recycling conveyors

CONTINUE EXPLORING

Products & support for this industry

Original schematic of recycling & sorting beltsBelting

Recycling & sorting belts

Recycling lines move mixed materials between inspection, separation and processing stages. Belt surface and construction should suit the waste stream, oils, sharp objects and cleaning requirements.

Explore
Original schematic of oil-resistant beltingBelting

Oil-resistant belting

Oily or greasy material can affect ordinary rubber covers. Nitrile-blended and mild-oil-resistant compounds are options to discuss for recycling, timber processing and similar material streams.

Explore

YOUR NEXT PROJECT

Let’s talk conveyors.

Share the material, the challenge and the work you need done.

Start an enquiry