INDUSTRIAL CONVEYING & MATERIAL HANDLINGVICTORIA-WIDE CONVEYOR SERVICES
Statewide ConveyorsEnquire

Industries

Forestry & timber

Timber, bark and wood chips present different handling challenges. Surface profile, impact and exposure to oils or resins all influence belt selection.

Logs, chips, bark and residues

Timber operations move materials with very different shapes and bulk behaviour. Chips and bark may need contained belt transfers, while irregular offcuts create local impact and snagging risks. Identify the handled stream and whether the conveyor receives a steady feed or intermittent surges.

Allow for resin, moisture and incline

Resins and oils can affect cover selection; wet bark behaves differently from dry chips on an incline. Profiles can improve retention, but material release and cleaning must also be assessed. Oversize pieces trapped at a chute or skirt can tear a belt even when its cover is otherwise suitable.

Inspect the return path

Fibrous material can gather around rollers and pulleys and hide developing wear. Planned inspections should consider build-up, roller rotation, joint condition and access for safe removal of accumulated material. Belt repair or replacement should follow correction of any snagging point or misaligned feed.

Timber applications: account for shape and moisture

Chips and bark

Variable moisture and uneven flow

Review loading, containment and the belt profile on inclined runs.

Offcuts and irregular pieces

Snagging at skirts or transfer edges

Assess clearances and the cause of tears before a belt repair.

Return runs

Fibres and resin collect near components

Record deposits and inspect affected rollers, pulley surfaces and access.

Specify the actual timber stream

A belt handling fine dry chips has different requirements from one carrying wet bark or sharp offcuts. Include the largest expected pieces and any resin or oil exposure. If the stream has changed since the conveyor was installed, review the application before repeating the original belt or skirt specification.

Tell us about your operation

  • Chips, bark, offcuts or other material and its moisture range
  • Largest pieces, incline and throughput
  • Resin or oil exposure and current belt specification
  • Photos of snagging, carryback and available maintenance access
Discuss this application

CONTINUE EXPLORING

Products & support for this industry

Original schematic of oil-resistant beltingBelting

Oil-resistant belting

Oily or greasy material can affect ordinary rubber covers. Nitrile-blended and mild-oil-resistant compounds are options to discuss for recycling, timber processing and similar material streams.

Explore
Original schematic of chevron conveyor beltsBelting

Chevron conveyor belts

Chevron patterns create pockets of grip for material travelling uphill. Open-V, closed-V and other profiles offer different loading and release characteristics across an inclined conveyor.

Explore

YOUR NEXT PROJECT

Let’s talk conveyors.

Share the material, the challenge and the work you need done.

Start an enquiry